![]() ![]() Once you find or make a valet switch then follow these instructions to program the remote:ġ. Try to locate these wires, if you see them try to follow them and you'll find the valet switch hidden somewhere, if you don't see them connected then we might need to find and make a valet switch at least temporarily to program your remotes. According to the diagrams that I have for that system, the switch should be a toggle switch(on-off). If you don't have one then you might need to make one for it or purchase a connector and a switch. You need to find that switch as that's the only way to program the new remote. If you see this connector then you have the valet switch which is mounted remotely from the module, it's not part of the module. In the control module there should a 2 pin blue connector which is for the valet switch with a gray and black wires. In order to program the remote you're going to need that valet switch.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |